|
|
No Heat (Tub not going to set temp.)
Pull filter (see if light comes on), if so... Replace filter
Knife valves not fully open, if so... Open knife valves
Pressure switch out of calibration, if so... Adjust pressure switch
Faulty Pressure Switch, if so... Replace pressure switch
Air leak, check pump suction line, if so... Tighten pump union
Heating element corroded, if so... Replace element
Faulty control panel, if so... Replace panel
Home |
About Spas |
Why Canadian? |
Compare Manufacturers
Find a Retailer |
Specials |
Contact Us
|
|
